NO.1 Scenario:
A customer network engineer has edited their OSPF network configuration and now your customer is
experiencing network issues. They have contacted you to resolve the issues and return the network
to full functionality.
The 6.6.0.0 subnets are not reachable from R4. how should the problem be resolved?
A. Edit access-list 46 in R6 to permit all the 6.6.0.0 subnets
B. Apply access-list 46 in R6 to a different interface
C. Apply access-list 1 as a distribute-list out under router ospf 100 in R4
D. Remove distribute-list 64 out on R6
E. Remove distribute-list 1 in ethernet 0/1 in R4
F. Remove distribute-list 1 in ethernet 0/0 in R4
Answer: D

Cisco questions   300-135 Exam PDF   300-135 Exam Prep   300-135   300-135 Exam Prep
Explanation:

NO.2 The following commands are issued on a Cisco Router:
Router(configuration)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1
Router(configuration)#access-list 199 permit tcp host 172.16.1.1 host 10.1.1.1
Router(configuration)#exit Router#debug ip packet 199
What will the debug output on the console show?
A. All IP packets passing through the router
B. Only IP packets with the source address of 10.1.1.1
C. All IP packets from 10.1.1.1 to 172.16.1.1
D. All IP Packets between 10.1.1.1 and 172.16.1.1
Answer: D

Cisco Exam Tests   300-135 Practice Test   300-135   300-135 Free download
What level of logging is enabled on a Router where the following logs are seen?

NO.3 Refer to the configuration statements shown in the graphic above.
R1(config)#access-list 199 permit tcp host 10.1.1.1 host 172.16.1.1 R1(config)#access-list 199 permit
tcp host 172.16.1.1 host 10.1.1.1 R1(config)#end R1#debug ip packet 199 detail
Which statement reflects what the effect is of this configuration sequence?
A. These commands will generate an error message because you cannot use an access list with any
debug commands.
B. These commands will have no effect at all. The debug ip packet command will work as normal and
display info for all IP packets.
C. These commands turn on debug ip packet only for packets between hosts 10.1.1.1 and 172.16.1.1.
D. These commands will only work when you specify only one host rather than two.
Answer: C

Cisco questions   300-135 test questions   300-135 test   300-135

NO.4 The implementations group has been using the test bed to do a 'proof-of-concept' that requires
both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the
network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services,
and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the
209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
What is the solution to the fault condition?
A. Under the interface Serial0/0/1 enter the ip access-group edge_security out command.
B. Under the ip access-list extended edge_security configuration add the permit ip
209.65.200.224 0.0.0.3 any command.
C. Under the ip access-list extended edge_security configuration delete the deny ip
10.0.0.0.0 0.255.255.255 any command.
D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in
command and enter the ip access-group edge_security out command.
Answer: B

Cisco exam prep   300-135 Bootcamp   300-135   300-135 study guide

NO.5 What is the result of configuring the logging console warning command?
A. Messages with a severity level of 4 and higher will be logged to all available TTY lines.
B. Only warning messages will be logged on the console.
C. Warning, error, critical, and informational messages will be logged on the console.
D. Warning, critical, alert, and emergency messages will be logged on the console.
E. The logging console warning command needs to be followed in the configuration with
logging buffered byte size to specify the message buffer size for the console.
Answer: D

Cisco Exam Dumps   300-135   300-135 Test Questions   300-135   300-135 Braindumps   300-135 Test Questions

NO.6 Exhibit:
A network administrator is troubleshooting an EIGRP connection between RouterA, IP address
10.1.2.1, and RouterB, IP address 10.1.2.2. Given the debug output on RouterA, which two
statements are true? (Choose two.)
A. RouterA received a hello packet with mismatched autonomous system numbers.
B. RouterA received a hello packet with mismatched hello timers.
C. RouterA received a hello packet with mismatched authentication parameters.
D. RouterA received a hello packet with mismatched metric-calculation mechanisms.
E. RouterA will form an adjacency with RouterB.
F. RouterA will not form an adjacency with RouterB.
Answer: D,F

Cisco Exam Questions   300-135 answers real questions   300-135 pdf   300-135 practice test   300-135

NO.7 You enabled CDP on two Cisco Routers which are connected to each other. The Line and
Protocol status for the interfaces on both routers show as UP but the routers do not see each other a
CDP neighbors. Which layer of the OSI model does the problem most likely exist?
A. Physical
B. Session
C. Application
D. Data-Link
E. Network
Answer: D

Cisco   300-135 pdf   300-135 practice test   300-135   300-135 Exam Dumps   300-135 Actual Test

NO.8 The implementations group has been using the test bed to do a 'proof-of-concept'. After several
changes to the network addressing, routing schemes, a trouble ticket has been opened indicating
that the loopback address on R1 (2026::111:1) is not able to ping the loopback address on
DSW2(2026::102:1).
Use the supported commands to isolated the cause of this fault and answer the following questions.
The fault condition is related to which technology?
A. NTP
B. IPv4 OSPF Routing
C. IPv6 OSPF Routing
D. IPv4 layer 3 security
Answer: C

Cisco original questions   300-135 test answers   300-135 demo
Explanation:
On R2, IPV6 OSPF routing, configuration is required to add ipv6 ospf 6 area 0 under interface serial
0/0/0.23

ITbraindumps's products can not only help customers 100% pass their first time to attend Cisco certification 300-135 exam, but also provide a one-year of free online update service for them, which will delivery the latest exam materials to customers at the first time to let them know the latest certification exam information. So ITbraindumps is a very good website which not only provide good quality products, but also a good after-sales service.

ITbraindumps guarantee exam success rate of 100% ratio, except no one. You choose ITbraindumps, and select the training you want to start, you will get the best resources with market and reliability assurance.

ITbraindumps's training product for Cisco certification 300-135 exam includes simulation test and the current examination. On Internet you can also see a few websites to provide you the relevant training, but after compare them with us, you will find that ITbraindumps's training about Cisco certification 300-135 exam not only have more pertinence for the exam and higher quality, but also more comprehensive content.

ITbraindumps is a website which is able to speed up your passing the Cisco certification 300-135 exams. Our Cisco certification 300-135 exam question bank is produced by ITbraindumps's experts's continuously research of outline and previous exam. When you are still struggling to prepare for passing the Cisco certification 300-135 exams, please choose ITbraindumps's latest Cisco certification 300-135 exam question bank, and it will brings you a lot of help.

Exam Code: 300-135
Exam Name: Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)
One year free update, No help, Full refund!
300-135 PDF VCE Total Q&A: 79 Questions and Answers
Last Update: 03-29,2015

300-135 Study Guide Detail : Click Here

ITbraindumps offer the latest 74-324 exam material and high-quality 1Y0-300 pdf questions & answers. Our C_ISR_60 VCE testing engine and C2090-548 study guide can help you pass the real exam. High-quality C2010-650 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itbraindumps.com/300-135_exam.html