Implementing Cisco IP Switched Networks (SWITCH 300-115) is a qualifying exam for the Cisco CCNP Routing and Switching and CCDP certifications. The SWITCH 300-115 exam certifies the switching knowledge and skills of successful candidates. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture.

With ITbraindumps's Cisco 642-813 exam training materials you can pass the Cisco 642-813 exam easily. The training tools which designed by our website can help you pass the exam the first time. You only need to download the ITbraindumps Cisco 642-813 exam training materials, namely questions and answers, the exam will become very easy. ITbraindumps guarantee that you will be able to pass the exam. If you are still hesitant, download our sample of material, then you can know the effect. Do not hesitate, add the exam material to your shopping cart quickly. If you miss it you will regret for a lifetime.

ITbraindumps is a website that provide the counseling courses for IT professionals to participate in Cisco certification 642-813 exam and help them get the Cisco 642-813 certification. The courses of ITbraindumps is developed by experienced experts' extensive experience and expertise and the quality is very good and have a very fast update rate. Besides, exercises we provide are very close to the real exam questions, almost the same. When you select ITbraindumps, you are sure to 100% pass your first time to participate in the difficult and critical Cisco certification 642-813 exam.

Exam Code: 642-813
Exam Name: Implementing Cisco IP Switched Networks
One year free update, No help, Full refund!
642-813 Latest Dumps Total Q&A: 196 Questions and Answers
Last Update: 03-23,2015

642-813 Braindumps Detail : Click Here

It is inconceivable that ITbraindumps Cisco 642-813 test dumps have 100% hit rate. The dumps cover all questions you will encounter in the actual exam. So, you just master the questions and answers in the dumps and it is easy to pass 642-813 test. As one of the most important exam in Cisco certification exam, the certificate of Cisco 642-813 will give you benefits. And you must not miss the opportunity to pass 642-813 test successfully. If you fail in the exam, ITbraindumps promises to give you FULL REFUND of your purchasing fees. In order to successfully pass the exam, hurry up to visit ITbraindumps.com to know more details.

In the information era, IT industry is catching more and more attention. In the society which has a galaxy of talents, there is still lack of IT talents. Many companies need IT talents, and generally, they investigate IT talents's ability in according to what IT related authentication certificate they have. So having some IT related authentication certificate is welcomed by many companies. But these authentication certificate are not very easy to get. Cisco 642-813 is a quite difficult certification exams. Although a lot of people participate in Cisco 642-813 exam, the pass rate is not very high.

While most people would think passing Cisco certification 642-813 exam is difficult. However, if you choose ITbraindumps, you will find gaining Cisco certification 642-813 exam certificate is not so difficult. ITbraindumps training tool is very comprehensive and includes online services and after-sales service. Professional research data is our online service and it contains simulation training examination and practice questions and answers about Cisco certification 642-813 exam. ITbraindumps's after-sales service is not only to provide the latest exam practice questions and answers and dynamic news about Cisco 642-813 certification, but also constantly updated exam practice questions and answers and binding.

Each IT certification exam candidate know this certification related to the major shift in their lives. Certification exam training materials ITbraindumps provided with ultra-low price and high quality immersive questions and answersdedication to the majority of candidates. Our products have a cost-effective, and provide one year free update . Our certification training materials are all readily available. Our website is a leading supplier of the answers to dump. We have the latest and most accurate certification exam training materials what you need.

If you want to achieve maximum results with minimum effort in a short period of time, and want to pass the Cisco 642-813 exam. You can use ITbraindumps's Cisco 642-813 exam training materials. The training materials of ITbraindumps are the product that through the test of practice. Many candidates proved it does 100% pass the exam. With it, you will reach your goal, and can get the best results.

642-813 Free Demo Download: http://www.itbraindumps.com/642-813_exam.html

NO.1 HOTSPOT
Answer:
Explanation:
Enable preempt on the VLAN 101 HSRP group on DSW1 Issue the "show run" command and you can
see that the "standby 1 preempt" configuration command is missing on DSW1. This is needed for it to
become the active HSRP router immediately.

NO.2 Refer to the exhibit.
HSRP has been configured and Link A is the primary route to router R4. When Link A fails, router R2
(Link B) becomes the active router. Which router will assume the active role when Link A becomes
operational again?
A. The primary router R1 will reassume the active role when it comes back online.
B. The standby router R2 will remain active and will forward the active role to router R1 only in the
event of its own failure.
C. The standby router R2 will remain active and will forward the active role to router R1 only in the
event of Link B failure.
D. The third member of the HSRP group, router R3, will take over the active role only in event of
router R2 failure.
Answer: A

Cisco PDF VCE   642-813 test answers   642-813
Explanation:
When Link A goes down, the HSRP priority value of R1 goes down to 95 (105-10) so R2 will be the
active router as it is using the default priority of 100. When Link A comes back up, R1's priority is then
105 again and since pre-emption is enabled, it will take back over the active role again.

NO.3 What is needed to verify that a newly implemented security solution is performing as expected
?
A. a detailed physical and logical topology
B. a cost analysis of the implemented solution
C. detailed logs from the AAA and SNMP servers
D. results from audit testing of the implemented solution
Answer: D

Cisco Actual Test   642-813 Exam Dumps   642-813   642-813 Actual Test
Explanation:
Recommended by Cisco verification plan for designing a security solution includes verification of an
implemented security solution requires results from audit testing of the implemented solution.
Reference:
http://www.ccnpguide.com/design-documentation/

NO.4 CORRECT TEXT
Each of these vlans has one host each on its ports
SVI on vlan 1 - ip 192.168.1.11 Switch B -Ports 3, 4 connected to ports 3 and 4 on Switch A
Port 15 connected to Port on Router.
Tasks to do:
1.Use non proprietary mode of aggregation with Switch B being the initiator -- Use LACP with B being
in Active mode
2.Use non proprietary trunking and no negotiation -- Use switchport mode trunk and switchport trunk
encapsulation dot1q
3.Restrict only to the VLANs needed -- Use either VTP pruning or allowed VLAN list. The preferred
method is using allowed VLAN list
4.SVI on VLAN 1 with some ip and subnet given
5.Configure switch A so that nodes other side of Router C are accessible -- on switch A the default
gateway has to be configured.
6.Make switch B the root
Answer:
on Switch A
verify with show run if you need to create vlans 21-23
int range fa0/9 - 10
switchport mode access
switchport access vlan 21
spanning-tree portfast
no shut
int range fa0/13 - 14
switchport mode access
switchport access vlan 22
spanning-tree portfast
no shut
int range fa0/16 - 16
switchport mode access
switchport access vlan 23
spanning-tree portfast
no shut
int range fa0/3 - 4
channel-protocol lacp
channel group 1 mode passive
no shut
int port-channel 1
switchport mode trunk
switchport trunk encapsulation dot1q
spanning-tree allowed vlans 1,21-23
no shut
int vlan 1
ip address 192.168.1.11 255.255.255.0
no shut
SW B
conf t
interface range fastethernet 0/9-10
switchport mode access
switchport accress vlan 21
spanning-tree portfast
no shut
interface rang fastethernet 0/13-14
switchport mode access
switchport accress vlan 22
spanning-tree portfast
no shut
interface rang fastethernet 0/15-16
switchport mode access
switchport accress vlan 23
spanning-tree portfast
no shut
interface range fastethernet 0/3-4
switchport trunk encapsulation dot1q
switchport trunk native vlan 99
switchport trunk allowed vlan 1,21-23,99
switchport mode trunk
channel-protocol lacp
channel-group 1 mode passsive
no shut
// port-channel 1 automatically created and nothing needs to be configured under it
ip default-gateway 10.10.10.1
// VLAN 1 already configured nothing more to be done on it
SWA
vlan 21
vlan 22
vlan 23
interface range fastethernet 0/3-4
switchport trunk native vlan 99
switchport trunk allowed vlan 1,21-23,99
switchport mode trunk
channel-protocol lacp
channel-group 1 mode active
no shut
spanning-tree vlan 1,21-23,99 root primary

NO.5 You have configured a Cisco Catalyst switch to perform Layer 3 routing via an SVI and you have
assigned that interface to VLAN 20. To check the status of the SVI, you issue the show interfaces vlan
20 command at the CLI prompt. You see from the output display that the interface is in an up/up
state. What must be true in an SVI configuration to bring the VLAN and line protocol up?
A. The port must be physically connected to another Layer 3 device.
B. At least one port in VLAN 20 must be active.
C. The Layer 3 routing protocol must be operational and receiving routing updates from neighboring
peer devices.
D. Because this is a virtual interface, the operational status is always in an "up/up" state.
Answer: B

Cisco test questions   642-813 Exam Cost   642-813   642-813 Study Guide   642-813 Study Guide
Explanation:
The SVI interfaces have to fulfill the following general conditions to be up/up:
VLAN exists and is in active status on the switch VLAN database.
VLAN interface exists on the router and is not administratively down.
At least one L2 (access port or trunk) port exists and has a link up on this VLAN. The latest
implementation of the autostate feature allows synchronization to Spanning-Tree Protocol (STP) port
status.
A VLAN interface will be brought up after the L2 port has had time to converge (that is, transition
from listening-learning to forwarding). This will prevent routing protocols and other features from
using the VLAN interface as if it were fully operational. This also prevents other problems, such as
routing black holes, from occurring.
At least one L2 (access port or trunk) port is in spanning-tree forwarding state on the VLAN. So for SVI
to bring the vlan and line protocol up at least one port in that vlan must be active.
Reference:
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a0080160b14
. shtml

NO.6 Which statement best describes implementing a Layer 3 EtherChannel?
A. EtherChannel is a Layer 2 feature and not a Layer 3 feature.
B. Implementation requires switchport mode trunk and matching parameters between switches.
C. Implementation requires disabling switchport mode.
D. A Layer 3 address is assigned to the physical interface.
Answer: C

Cisco Test Answers   642-813   642-813 Test Answers   642-813 Study Guide
Explanation:
To enable Layer 3 EtherChannel all interfaces participating in channel creation must be in routing
mode. To move interface from switching mode to routing mode one uses the command no
switchport.
Reference:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.1E/native/configuration/guide
/c hannel.html

NO.7 Refer to the exhibit.
Which statement about the private VLAN configuration is true?
A. Only VLAN 503 will be the community PVLAN, because multiple community PVLANs are not
allowed.
B. Users of VLANs 501 and 503 will be able to communicate.
C. VLAN 502 is a secondary VLAN.
D. VLAN 502 will be a standalone VLAN, because it is not associated with any other VLANs.
Answer: C

Cisco test questions   642-813   642-813 Braindumps   642-813   642-813 Exam Tests
Explanation:
VLAN 502 has been configured as private-vlan community. So it is a secondary PVLAN

NO.8 What are three results of issuing the switchport host command? (Choose three.)
A. disables EtherChannel
B. enables port security
C. disables Cisco Discovery Protocol
D. enables PortFast
E. disables trunking
F. enables loopguard
Answer: A,D,E

Cisco demo   642-813 Practice Exam   642-813 study guide   642-813   642-813   642-813 test questions
Explanation:
The switchport host command disables channeling, enables spanning-tree portfast and enables the
switchport nonegotiate command to turn off DTP negotiation packets.
Reference:
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfd6.
shtml#hostfix

ITbraindumps offer the latest EX0-005 exam material and high-quality C2010-940 pdf questions & answers. Our ACMP_6.3 VCE testing engine and C2180-376 study guide can help you pass the real exam. High-quality C2040-405 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itbraindumps.com/642-813_exam.html